22. octubre 2010

Han® Q 12/0 PCB-Adapter

Han® Q 12/0 PCB-Adapter

12x Power from the Cable to the Board

Thanks to the Han® Q 12/0 PCB Adapter, the HARTING connector in the small
Han® 3 A series with the highest number of pins now has the option of direct connection to device boards. In addition to the actual
PCB adapter, special versions of the
Han® Q 12/0 connector's male and female inserts for the PCB Adapter will be available.

The PCB Adapter's installation is independent of the connector – it can be pre-installed according to the pinhole pattern on the board, as with other passive elements. The male or female insert for the PCB Adapter is installed after the board has been installed in the housing by being mounted on to the PCB and fixed in place on the bulkhead-mounted housing with the fixing screw. Thanks to the separate connector for the PCB Adapter, all 12 contacts and the PE conductor can be used. Consequently 12 contacts + PE are available for the connection to the PCB, with the following technical parameters in accordance with DIN EN 61984:

- 7.5 A braking current
- 250 V rated voltage
- 4 KV rated impulse voltage at pollution degree 3

HARTING has consequently added a further PCB Adapter model to its program, which includes the existing solutions from the Han DD®, Han E®, Han-Modular ® and
Han® Q series.

 

Available Downloads:

pcb_adapter_hanq12_0_gb.pdf

PDF

270 K download